Skip to content
Bayne Custom Woodworking
  • Services
  • AboutExpand
    • Favorite Tools
  • Gallery
  • Custom Projects and Blog Posts
  • Shop Our Products
Contact Us
Bayne Custom Woodworking

Showing all 10 results

  • Black Walnut decorative bowl

    Black Walnut decorative bowl

    $250.00

    Hand carved black walnut serving bowl – Local to Nashville TN pickup only

    Add to cartContinue Loading Done
  • Live Edge, Black Walnut side table

    Live Edge, Black Walnut side table

    $250.00

    A one of a kind, gorgeous live edge Black Walnut side table with Black Walnut legs.

    This is available for immediate pickup in Mt. Juliet for $350 + sales tax. Now 50% off
    Cash, Venmo or Zelle (sales tax added at time of purchase)

    Add to cartContinue Loading Done
  • Recipe stands to support Recipe Book or Tablet Device

    Recipe stands to support Recipe Book or Tablet Device

    $95.00

    Black Walnut, Maple, and Cherry, Red Oak Recipe Stands. These recipe stands are a must for bakers and cooks. While in design they are the same, in the variety of wood they are uniquely different. They rest at an angle with a stand that rotates into the back of the stand so they can be easily hung on a wall to be out of the way when not in use. They will hold a recipe book, or any type of tablet such as iPad or Android device for using online recipes. They are protected for easy cleaning so if you have little hands helping that tends to be a bit messy.

    They are also excellent for holding books and tablet devices when not in the kitchen as well.

    There are 6 available for immediate pickup in the Mt. Juliet/Nashville area for $95 + sales tax.

    Read moreContinue Loading Done
  • Cedar Business Card Holder — Gift for New Business Owner

    Cedar Business Card Holder — Gift for New Business Owner

    $15.00

    Hand-made cedar business card holder with a maximum height of 3¼”. The low-end height is 1½”. The length and width is 6¼” x 4¼” wide.

    This is available for immediate pickup in Mt. Juliet for $15 + sales tax. This product is available for shipping.

    Add to cartContinue Loading Done
  • Cedar Storage Box

    Cedar Storage Box

    $75.00

    Our hand-made cedar storage box with cut out handles. These make great boxes for organizing your home.

     

    Add to cartContinue Loading Done
  • Cherry, Black Walnut, & Maple Cutting Boards

    Cherry, Black Walnut, & Maple Cutting Boards

    $95.00

    Multiple  gorgeous 1” thick, Cherry, Black Walnut, & Maple  cutting boards. These three-wood, boards are 18″ x 15 1/2″, 16″ x 15 1/2″ and 16″ x 16″ and sealed with cutting board oil and ready for use. All come with rubber feet to prevent sliding during use. Each is 95.00 + tax

    Read moreContinue Loading Done
  • Box and blocks

    Children’s Cedar Building Blocks with Cedar Box Container

    $85.00

    Hand-made natural cedar children’s toy building blocks in a hand-made cedar wooden box.

    The box outside dimensions measure approximately – 6″ H x 12½” L x 7¾” W

    The cedar building blocks contains approximately 65-70 blocks of various sizes for creative play.

    Read moreContinue Loading Done
  • Hand-Made Natural Cedar Toy Blocks

    Hand-Made Natural Cedar Toy Blocks

    $65.00

    Hand-made natural cedar children’s toy building blocks with smooth, beveled edges. Each set contains approximately 70-75 blocks of various sizes for creative play.

    Add to cartContinue Loading Done
  • Small Decorative Hardwood Boxes with Dovetail Joints

    Small Decorative Hardwood Boxes with Dovetail Joints

    $95.00

    These decorative hardwood boxes created with black walnut and maple will enhance any dining table, mantle or console table. Created with dovetails to accent the various woods these will be conversation pieces for years to come.

    Read moreContinue Loading Done
  • Ash and Black Walnut Wooden Coasters — Perfect Stocking Stuffer

    Ash and Black Walnut Wooden Coasters — Perfect Stocking Stuffer

    $35.00

    Set of four, custom wooden coasters made of ash with black walnut accents. They include a polyurethane finish for durability. They each measure ¾” height, and are 4″ x 4″ wide.

    Add to cartContinue Loading Done
  • Services
  • About
  • Gallery
  • Custom Projects and Blog Posts
  • Shop Our Products

It seems everything I build is heavy and big and this project is no exception. Constructed of Red Oak, this cabinet will be for a turntable and speakers as well as other audio equipment. 
While the shelves are 1 1/2" thick x 18" deep x 60" long, the support walls are 4 1/2" thick x 16 3/4" tall by 24" long. They are the only support the shelves will have.
I used 1/2" threaded rod that runs through the shelves and then the support walls. In order to make the walls 4 1/2" thick I actually glued multiple pieces together to create the thickness. So before gluing them up I created a 1/2" groove to accommodate for the threaded rod. 
At time frame 2:22 I mention that I am routered the groove into the shelves when I am actually putting them into the supports.

It seems everything I build is heavy and big and this project is no exception. Constructed of Red Oak, this cabinet will be for a turntable and speakers as well as other audio equipment.
While the shelves are 1 1/2" thick x 18" deep x 60" long, the support walls are 4 1/2" thick x 16 3/4" tall by 24" long. They are the only support the shelves will have.
I used 1/2" threaded rod that runs through the shelves and then the support walls. In order to make the walls 4 1/2" thick I actually glued multiple pieces together to create the thickness. So before gluing them up I created a 1/2" groove to accommodate for the threaded rod.
At time frame 2:22 I mention that I am routered the groove into the shelves when I am actually putting them into the supports.

YouTube Video VVV5Zm9tc1JGenFNNXdTaUJhZGZPckx3LjRpZEs0TThTcWt3

Audio System Stand

Bayne Custom Woodworking February 23, 2026 4:43 pm

Time to get creative in order to assemble this Custom Stereo Console. It's 38" tall with 3, 1 1/2" thick red oak shelves and supports 16 3/4" tall, so I needed to come up with a way to hold it all together. I decided to run threaded rod through all 38". After routering grooves in the supports and drilling holes in the shelves I needed to get creative to insert the rod through it all. I pulled out my @ridgid drill driver and let it do the hard work. 
@RIDGID_Tools

Time to get creative in order to assemble this Custom Stereo Console. It's 38" tall with 3, 1 1/2" thick red oak shelves and supports 16 3/4" tall, so I needed to come up with a way to hold it all together. I decided to run threaded rod through all 38". After routering grooves in the supports and drilling holes in the shelves I needed to get creative to insert the rod through it all. I pulled out my @ridgid drill driver and let it do the hard work.
@RIDGID_Tools

YouTube Video VVV5Zm9tc1JGenFNNXdTaUJhZGZPckx3LmtNUUZMQllkUGtn

Creative way to insert threaded rod

Bayne Custom Woodworking February 19, 2026 7:44 pm

The cedar really gives the prominent definition of sapwood and heartwood. when we makers are working on furniture, we want to make sure we're using the heartwood. that heartwood really gives the furniture the quality that you want.  While there are times when we use the sap wood,for instance, when I build aderondack chairs out of cedar, I don't mind combining the sap wood and the heart wood because it allows you to see the differences.But when you're building a solid oak or maple piece of furniture you want to use that heart wood.

The cedar really gives the prominent definition of sapwood and heartwood. when we makers are working on furniture, we want to make sure we're using the heartwood. that heartwood really gives the furniture the quality that you want. While there are times when we use the sap wood,for instance, when I build aderondack chairs out of cedar, I don't mind combining the sap wood and the heart wood because it allows you to see the differences.But when you're building a solid oak or maple piece of furniture you want to use that heart wood.

YouTube Video VVV5Zm9tc1JGenFNNXdTaUJhZGZPckx3LlZadUhTTUpFbW5B

Heartwood and Sapwood defined in cedar

Bayne Custom Woodworking February 14, 2026 9:58 am

The milling process always seems to be the time consuming process of any project. Using multiple machines ( some not shown) table saw, miter saw, jointer, planer, domino jig, bessey clamps and titebond glue, But to see the lumber start as a 9/4 red oak kiln dried rough board and end up as almost finished product is very satisfying.

The milling process always seems to be the time consuming process of any project. Using multiple machines ( some not shown) table saw, miter saw, jointer, planer, domino jig, bessey clamps and titebond glue, But to see the lumber start as a 9/4 red oak kiln dried rough board and end up as almost finished product is very satisfying.

YouTube Video VVV5Zm9tc1JGenFNNXdTaUJhZGZPckx3LkxQeWQ5NEZvMWhJ

Wood Milling Process

Bayne Custom Woodworking February 13, 2026 1:29 pm

Load More... Subscribe

© 2026 Bayne Custom Woodworking | Nashville Woodworker | Custom Furniture

Facebook Instagram YouTube
Scroll to top
  • Services
  • About
    • Favorite Tools
  • Gallery
  • Custom Projects and Blog Posts
  • Shop Our Products
Contact